Stainless Steel Railing, Column Cladding, Modular and Digital Signages, Brass Railing

ABOUT STAINLESS STEEL

Special Formula

Weight of S.S Pipe

OD (MM) - W.T. (MM) X W.T. (MM) X 0.00756=kg (per ft)
OD (MM) - W.T. (MM) X W.T. (MM) X 0.00248=kg (per mtr)

Weight od S.S. Round

Dia (MM) X Dia (MM) x 0.0019 Per ft. X 3.281 Per mtr.

Duplex Steels

F-51/2205, 2304, 2507

Weight of Hexazontal Rod

Dia (MM) X Dia (MM) X 0.0019 (kg) Per ft. +(25%)

Weight of S.S Square Rod

Diameter X Diameter X .0025 = Weight Per ft.

Weight of Stainless Steel Sheets

(A) Lenght X Width X Thickness X 8=kg (Per Sheet)
(mtr) (mtr) (mm)

Weight of S.S. Circle in MM Per Piece

Diameter X Diameter X Thickness, 160000 = Weight Per Pc.

Weight of S.S. Flast in mm per ft.

Width X Lenght X Thickness X 8=Weight per ft.

Weight of Copper Pipe

OD (MM - W.T. (MM) X W.T. (MM) X 0.0078=kg (Per Feet)

Weight of S.S. Sheets, Plate, Pipe, ROund, Hex, Circle, Square, flat, 3=Aluminium Weight Approx.

Pressure Conversion

kg/mm2 X3.14=Width of Cutting Sheet or Plate

Pressure Conversion

kg/mm2 X 1422.3 = Psi=kg/cm2 X 14.223

1 Feet = 0.3048 meter

1mtr = 3.2808 ft.
1 inch = 25.4 mm
1 pound = 0.454 (45359243) kgs

CHEMICAL COMPOSITION

Grade AISI	Chemical Composition %									Equivalent International Standards
AISI	C Max	Mn Max	P Max	S Max	Si Max	Cr	Ni	Mo	Other Element	Din	Is	En
201	0.15	5.5/7.5	0.06	0.030	1.00	16.0/18.0	3.5/5.5	-	N-25max	-	10Cr17Mn6Ni4	-
202	0.15	7.5/10	0.06	0.030	1.00	17.0/19.0	4.0/6.0	-	N-25max	-		-
204Cu	0.08	6.5/8.5	0.06	0.030	2.00	16.0/17.0	1.5/3.0	0.30max	Cu 2.0/3.0	-	-	-
301	0.15	2.0	0.045	0.040	1.00	16.0/18.0	6.0/8.0	-	-	1.4310	10Cr17Ni7	-
302	0.15	2.0	0.045	0.030	1.00	17.0/19.0	8.0/10.0	-	-	1.4300	07Cr18Ni9	En-58A
303	0.15	2.0	0.045		1.00	17.0/19.0	8.0/10.0	-	-	1.4305	15Cr18Ni7	En-58M
304	0.08	2.0	0.045	0.030	1.00	18.0/20.0	8.0/10.0	-	-	1.4301	04Cr18Ni11	En-58E
304L	0.03	2.0	0.045	0.030	1.00	18.0/20.0	8.0/12.0	-	-	1.4306	02Cr18Ni11	-
308	0.08	2.0	0.045	0.030	1.00	19.0/21.0	10.0/12.0	-	-	1.4303	-	-
309	0.20	2.0	0.045	0.030	1.00	22.0/24.0	12.0/15.0	-	-	1.4828	02Cr24Ni12	-
309S	0.08	2.0	0.045	0.030	1.00	22.0/24.0	12.0/15.0	-	-	1.4833	-	-
310	0.25	2.0	0.045	0.030	1.00	24.0/26.0	19.0/22.0	-	-	1.4845	10Cr25Ni12	-
310S	0.08	2.0	0.045	0.030	1.00	24.0/26.0	19.0/22.0	-	-	1.4842	-	-
314	0.25	2.0	0.045	0.030	1.5/3.0	25.0/26.0	19.0/22.0	-	-	1.4841	-	-
316	0.08	2.0	0.045	0.030	1.00	16.0/18.0	10.0/14.0	2.0/3.0	Ti5xCmin	1.4401	04Cr18Ni12M02	En-58H
316L	0.03	2.0	0.045	0.030	1.00	16.0/18.0	10.0/14.0	2.0/3.0	Ti5xCmin	1.4404	03Cr17Ni12M02	-
317	0.08	2.0	0.045	0.030	1.00	18.0/20.0	11.0/15.0	3.0/4.0	Nb/Ta10xCmin	1.4449	-	-
317L	0.03	2.0	0.045	0.030	1.00	18.0/20.0	11.0/15.0	3.0/4.0	-	1.4438	Tiy5 C min	-
316Ti	0.08	2.0	0.045	0.030	1.00	16.0/18.0	10.0/14.0	2.0/3.0	-	1.4571	-	-
321	0.08	2.0	0.045	0.030	1.00	17.0/19.0	9.0/12.0	-	-	1.4541	04Cr18Ni10Ti20	En-58H
347	0.08	1.0	0.045	0.030	1.00	17.0/19.0	9.0/12.0	-	-	1.4550	04Cr18Ni10Nb40	En-58H
Ferritic
403	0.15	1.0	0.040	0.030	0.50	11.5/13.0	0.60	-	-	-	-	-
410	0.15	1.0	0.040	0.030	1.00	11.5/13.5	0.60	-	-	1.4006	12Cr13	En-58H
410S	0.08	1.0	0.040	0.030	1.00	11.5/13.5	0.6 max.	-	-	-	-	-
414	0.15	1.0	0.040	0.030	1.00	11.5/13.5	1.25/2.50	-	-	-	-	-
416	0.15	1.0	0.040	0.15/0.30	1.00	12.0/14.0	-	-	-	1.4005	-	-
420	over 0.15	1.0	0.040	0.030	1.00	12.0/14.0	-	-	-	1.4021	22Cr13	En-56C7D
430	0.120	1.0	0.040	0.030	0.75	16.0/18.0		-	-	1.4016	07Cr17	En-60
431	0.20	1.0	0.040	0.030	1.00	15.0/17.0	1.25/2.50	-	-	1.4057	15CCr16Ni2	En-57
440A	0.60/0.70	1.0	0.040	0.030	1.00	16.0/18.0			1.4109	-		-
440B	0.75	1.0	0.040	0.030	1.00	16.0/18.0	-	0.75max	-	1.4112	-	-
	0.95	-
440C	0.95	1.0	0.040	0.030	1.00	16.0/18.0	-	0.75max	-	1.4125	-	-
-	1.20	-							-